Adventure Nomad

Adventure Nomad

Friday, September 19, 2008

Building The Ultimate Travel Tripod: Part I The Ballhead

Cholla Cactus at Sunrise. Canon XT/350D, 10-22mm at 20mm, 1/10, f/16, ISO 800.

Galen Rowell once said that the lightest tripod you should use is the heaviest tripod you are willing to carry. Wise words. How heavy a tripod are you willing to carry on adventure trips, carrying the tripod on your back for days on end? I bet the answer is to go as light as possible.

For many years, my lightweight tripod has been a Gitzo G01 with the center column removed and a Slik Compact Ball Head bolted directly onto the legs. This setup weighed about 2 lbs and while it was good enough for my lightweight manual film cameras, the simple platform mounted (screw-on) and the small ballhead proved insufficient for modern DSLR equipment.

Getting the shot with a small travel tripod.

My search for the ultimate super lightweight tripod for all sorts of travel and adventure activities such as backpacking, bike touring and other multi-day expeditions begins with finding a good ballhead.

Components of a good ballhead are
i. The Platform; and
ii. The Ball.

1. The platform: Joining the camera to the ballhead.
With lighter cameras, you can screw on a platform mount directly into the tripod socket of the camera body. The problem with this is that with heavy DSLRs, it is difficult to apply sufficient torque to prevent the camera body from twisting itself loose when you put the camera into portrait orientation (flopped on its side). The solution to this is to get rid of the screw-on platform and get a plate and clamp that will not twist loose. The standard is the Arca-Swiss plate and clamp. The clamp has a dovetail profile that grips a matching mounting plate on the camera body. You can buy a custom plate specific to your camera body (best for heavier cameras like the Nikon D300, D700, Canon 50D, 5D Mk II), or get a generic plate (ok for lighter bodies like the Nikon D60, Canon XSi/450D). Unfortunately, the plate and clamp will add about 90g (3ozs) over the weight of a screw-on mounting platform, but until camera systems get lighter, the plate and clamp system is a necessary evil.

RRS BH-25 Pro with B2-mAS clamp. Photo courtesy of Really Right Stuff.

2. The Ball: The power to hold your gear
The holding power or load capacity of the ballhead is the main consideration when choosing a ballhead. In general, the bigger the ball, the greater the holding power will be. You will need a ballhead with holding power that is sufficient to hold the weight of the heaviest setup you expect to use. I’ve looked at many, and ended up with the Really Right Stuff BH-25 (185g) USD$145. The RRS BH-25 is by far the smallest, lightest and strongest in its class. It can hold my heaviest setup, a Nikon D300 with an 80-400mm lens, in a pinch. It has exceeded my expectations and is my choice for when I need an ultralight ballhead.

Next: Part II The Legs

4 comments:

Anonymous said...

That's pretty sweet. When I am traveling I always call an escort's phone number that I find on escortphonelist.com. It is a list of Escort phone numbers in many areas of the US and Canada. It removes duplicate images from all of the escort ads and shows the areas traveled, ages used etc etc. It is almost like escortphonesearch.com

Anonymous said...

Escortphonesearch.com and escortphonelist.com are just copies of bitchesofcraigslist.com however, bitchesofcraigslist.com was the first out there that made thumbnails of escorts posting in classifieds and tracked them by phone number

Unknown said...
This comment has been removed by the author.
Tracy B said...

Best Travel Tripods in 2018. Here are my Best Lightweight Travel Tripods Reviews 2018 some of the carbon fiber tripod and monopods, best tripod legs, tripod for camera stands suitable for your travel photography demands.